Steamfast SF-370 El Manual Del Propietario página 6

STEAM MOPPING ACCESSORIES
WARNING: Do not try to connect accessories while unit is emitting steam.
EXTENSION WANDS
1. Select one of the Extension Wands, and align rear end of wand with Steam Nozzle.
Rectangular hole in wand should align with blue lock/release button on nozzle.
2. Press down on blue lock/release button. While continuing to hold button down, slide Extension
Wand onto Steam Nozzle (FIGURE 1-A). Push wand over button, and continue pushing until
button snaps through hole on wand.
3. Slide second Extension Wand onto end of the one you just connected, this time lining up
rectangular hole of second wand with blue lock/release button of first wand. Press and hold
button, and firmly push second wand onto end of first wand until button snaps through hole
(FIGURE 1-B). Both Extension Wands should now be connected to the Steam Nozzle.
1-A
STEAM NOZZLE
MOP HEAD
1. Align Mop Head with end of second Extension Wand, so that rectangular hole in Mop Head
neck aligns with blue lock/release button on wand.
2. Press down on blue lock/release button. While continuing to hold button down, slide Mop
Head neck onto Extension Wand (FIGURE 2-A). Press on firmly until button snaps through
hole (FIGURE 2-B).
EXTENSION WAND
6
Assembling Your
Multi-Purpose Steam Cleaner
2-A
1-B
FIGURE 1
FIGURE 2
2-B