Attention
Assemble and disassemble must in the state of power failure.
How to use
Switch operation
Press the on/off switch, Vacuum cleaner will under automatic transmission, then press the adjustment button,
the machine will change to 2nd gear, press again, the machine will change to 1st gear, then press the on/off
switch, the machine will be closed.
on/off switch
High and low
Adjustment
buttopn
Indicator light display
Battery display:
Note: When the battery capacity is insufficient, the indicator will flash.
The battery status indicator has 4 indicators to indicate the battery capacity.
4 white light: battery capacity > 100%;
3 white light: battery capacity > 75%;
2 white light: battery capacity 25% ~ 75%;
1 white light: battery capacity < 25%;
4 white light flashing: out of battery.
Dust detection display: the suction force of the machine can be controlled according to the amount of dust.
1, 2 display: The machine will display the suction according to the gear you choose.
on/off switch
High and low
Adjustment
buttopn
EN-3