Camera Settings - AKASO Brave 7 LE Manual Del Usuario

EN
4. EV: -2.0/-1.0/0.0/+1.0/+2.0
Default setting is 0.
By default, your camera uses the entire image to determine the appropriate exposure
level. However, exposure lets you select an area that you want the camera to prioritize
when determining exposure. This setting is particularly useful in shots where an
important region might otherwise be over-or underexposed.
5. Metering: Center/Multi
Default setting is Multi.
The metering mode refers to the way in which a camera determines exposure.
6. Date Stamp: Off/Date/Date&Time
Default setting is Date&Time.
Turn on Date Stamp, this camera adds date stamp to the videos and photos you take.

Camera Settings

1. Sounds: Shutter/Boot-up/Beep/Volume
You can turn on or off these sound effects and adjust the volume of the camera in this
setting.
2. Angle: Super Wide/Wide/Medium/Narrow
Default setting is Super Wide.
The angle refers to how much of the scene (measured in degrees) can be captured
through the camera lens. Super Wide angle captures the largest amount of the scene,
while Narrow angle captures the least.
3. Diving Mode: Off/On
Default setting is Off.
Turn on Diving Mode, it can compensate for the lack of red light in underwater scenes.
Diving Mode is designed to be used in tropical and blue water, optimized for use
between 10 and 80 feet.
13