Tabla De Contenido; General Power Tool Safety - Felisatti SD10,8L2 Manual De Uso

CORDLESS DRIVER DRILL
(Li-ion Battery)
It is essential that instruction manual is read
before the power tool is operated for the first time.
Always keeps this instruction manual together
with the power tool. Ensure that the instruction
manual is with the power tool when it is given to
other persons.
Table of Contents
1. General Power Tool Safety Warnings ..........3
2. Specific Safety and Warnings ......................4
3. Check before Use ........................................7
4. Specifications and List of Contents .............7
5. Noise and vibration ......................................8
6. Description of Functions and Applications ...8
7. Operating Instructions .................................8
8. Maintenance ................................................10
9. Examples of Application ..............................10
As our engineers are striving for the constant
research and development to develop the
quality of products, shape or structure of
our model can be changed without previous
notice.

General Power Tool Safety

Warnings WARNING! Read all
safety
instructions. Failure to follow
the warning Instructions may result in electric
shock, fire and/or serious injury. Save all warnings
and instructions for future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
Battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or
Note
1
warning and
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use residual current
device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing
and use common sense when operating a
power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol
or medication. A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use safety equipment. Always wear
eye protection. Safety equipment such as
dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off position before connecting to
power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your
finger on the switch or energising power tools that
all
have the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench or
key left attached to a rotating part of the power
tool may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used.
Use of dust collection can reduce dustrelated
hazards.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off .
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
3