Replacing The Propeller - WowWee FlyTech HOVERPOD Guia De Inicio Rapido

enGlisH
Reattaching the trim fin
To reattach the trim fin insert it, as illustrated, firmly but gently .

replacing the propeller

You can replace the original propeller on your Hoverpod if the original one becomes
damaged or
is lost . One spare propeller is included in the Hoverpod package .
NOTE: Adult supervision is required when changing the propellers .
To replace the damaged propeller, follow the instructions below:
1 . Make sure the remote controller and Hoverpod are turned off .
2 . Using a pair of pliers (not supplied), carefully grasp the propeller and pull it off
the axle as indicated .
3 . Insert the new propeller into the axle gently
and carefully, making sure it is secure .
Be careful not to damage the motor .
4 . Test the propeller by turning it manually
to make sure it does not touch the propeller
guard .
8
Underside of Hoverpod