General Warnings - Midland ENERJUMPTRUCK Manual De Usuario

ENERJUMP TRUCK
JUMP STARTER
SAFETY INSTRUCTIONS / WARNINGS
• Charge Enerjump Truck fully prior to use.
• WARNING: Keep the unit clear of fire and water.
• WARNING: Shock Hazard. Keep away from children. Do not insert foreign objects into the DC input
jack. Do not open Enerjump Truck.
• WARNING: Explosion Hazard. Do not use this product where there are flammable fumes or gases,
such as in the bilge of a gasoline-powered boat, or near propane tanks.
• Do not leave Enerjump Truck completely unattended while being charged; please check the recharge
will proceed regularly.
• Do not charge the device close to flammable substances.
• WARNING: Fire Hazard. Do not crush or puncture Enerjump Truck. Do not short circuit metal con-
tacts or cables. The jump start feature is designed for short term operation only. Allow Enerjump Truck
to cool down for at least 1 minute after each jump start attempt.
• Do not touch cables immediately after use, they could be overheated.
IMPORTANT SAFETY INSTRUCTIONS
• Operating temperature: Using Enerjump Truck at high or low temperatures may reduce the internal
battery capacity and shorten the battery life.
Note: In extreme cold weather conditions, please bring Enerjump Truck indoors for best results.
• Remove personal metal items such as rings, bracelets, necklaces, and watches when working with bat-
teries.

GENERAL WARNINGS

• Enerjump Truck is supplied with a rechargeable Li-Cobalt battery. This battery is self-contained and
not consumer replaceable. Battery must be disposed of properly when it no longer holds a charge.
• Proper charging practices will increase the life of the batteries.

7