Basic Parameters; Charging Station - Blaupunkt BLUEBOT XVAC Manual De Instrucciones

DAILY MAINTENANCE
(Cleaned monthly)
SENSOR
Anti-collision
sensors
Infrared recharging
sensor
BATTERY
• The robot is provided with high-performance lithium-ion batteries. To maintain battery performance, please keep the robot charged
in daily use
• If the robot is left unused for a long period, please shut it down and keep it properly. Charge it at least every three months to avoid
damaging the batteries due to excessive discharge
FIRMWARE UPGRADE
Upgrade the firmware using the mobile APP. If new firmware is detected, upgrade it according to the notification in the App. The battery
level should be >50% during a firmware upgrade, so the robot should be placed on the charging station.

BASIC PARAMETERS

ROBOT

CHARGING STATION

Signal emission
Charging pins
Item
Model
Overall dimension
Product Weight
Li-battery
Rated Voltage
Rated power
Item
Overall dimension
Rated Power
Rated Output
28
area
Parameter
BLUEBOT XVAC
350X350X80mm
3. 0 kg
2600mAh
14. 4V
25W
Parameter
160x143X80mm
11. 4W
11. 4W
EN