Cooper Lighting Solutions Neo-Ray Instrucciones Para La Instalación página 5

10
Replace and attach electrical cover re-installing with screws.
Re-install the trim cover. Remove the protective liner from the
fixture.
12
Slide fixture onto joiner
Join fixtures by sliding joiner into consecutive fixtures like shown
above.
14
Energize fixture to ensure proper functionality. Remove protective
wrap.
5
COOPER LIGHTING SOLUTIONS Installation instructions
IL524010EN
11
For continuous runs: Install remote boxes and fixtures in ceiling
as indicated in the individual install instructions. Use length
configuration chart to determine layout of run.
13
Insert screws into joiner and tighten
Finish joining by inserting screws near the joint.