Meaning Of Symbols - GRAPHITE PRO 59GP300 Manual De Instrucciones

Explanation of used symbols
1 2
1. Read instruction manual, observe warnings and safety conditions therein
2. Device with class II insulation.
3. Use personal protection measures (protective goggles, earmuff protectors, anti-dust mask)
4. Disconnect the power cord before starting maintenance or servicing.
5. Keep the tool away from children.
6. Protect against rain.
CONSTRUCTION AND USE
Wall chaser is a hand-held power tool driven by single-phase commutator motor with insulation class II.
The power tool is designed for making chases in walls etc. in materials like concrete, stone, brick etc.
without use of water.
The wall chaser design allows to eject dust to attached bag or dust extraction system with industrial
vacuum cleaner. Special blade cuts full chase with no need to chisel. As a result, after the wall chaser pass
there is a chase with defined depth ready for pipe or cable laying.
Range of use covers renovation and construction works in areas of fitting electrical, water, heating and gas
systems.
The tool is designed for dry operation only. Use the power tool in accordance with the manufacturer's
instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1. Switch lock button
2. Switch
3. Rear guide roller
4. Front guide roller
5. Front handle
6. Lock lever
7. Dust extraction outlet
8. Carbon brush cover
9. Fixing screw
10. Outer flange
11. Spindle flange
12. Hose
13. Adaptor
14. Dust bag
15. Clamp
16. Hole for emptying
17. Inlet hole
18. Shoulder strap
* Differences may appear between the product and drawing.

MEANING OF SYMBOLS

CAUTION
WARNING
3 4
21
5 6