Explanation Of Symbols - BEHAbelt EErgo 60 Manual De Instrucciones

This operating manual describes the paddle welding tool in all its product
variations. The exact product identifi cation can be found on the product.
Please make sure, the product fi ts your application. If applicable just sec-
tions of the instruction manual might be signifi cant for several products.
Indication can be found at the corresponding sections.
In this instruction manual the paddle welding tool and its accessory
kit is called as „product".

1.0 Explanation of symbols

Symbols used on the device and in the operation manual and their respec-
tive meanings:
Caution! Warning of a potential danger. Please follow operation
manual.
Caution! Hazardous voltage, danger of electric shock.
Caution! Hot surface.
Attention. Please observe under any circumstances.
Protection class I according to DIN EN 61140 8 VDE 0140-1). All electri-
cally conductive housing parts are connected with the protective con-
ductor.
Mark of conformity, confi rms compliance with the currently valid EMC
directive (2014/30/EU), the standard EN 61326-1 and the low voltage
directive (2014/35/EU) DIN EN 60335-1.
Unit complies with directive (2012/19/EU) WEEE. Do not dispose
of unit in household garbage, but dispose of at recycling center for
electric and electronic end-of-life equipment.
19