Environmental Protection; Technical Specifications - Metabo PowerMaxx SGS 12 Q Manual Original

en ENGLISH

13. Environmental Protection

Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Battery packs may not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
Only for EU countries: never dispose of
power tools in your household waste!
According to European Directive 2012/19/EU
on Waste from Electric and Electronic Equipment
and implementation in national law, used power
tools must be collected separately and recycled in
an environmentally-friendly manner.
Discharge the battery pack in the power tool before
disposal. Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).

14. Technical Specifications

Explanatory notes regarding the specifications on
page 4.
Changes due to technological progress reserved.
U = voltage
n = number of cuts at idling speed
0
Shrub shears:
ø = maximum cutting thickness
max,S
L = useful blade length
S
m = weight (with smallest battery pack)
S
Grass shears:
B = useful blade width
G
m = weight (with smallest battery pack)
G
Measured values determined in conformity with
EN 62841 or EN 50636-2-94.
Permitted ambient temperature during operation:
-20 °C to 50 °C (limited performance with
temperatures below 0 °C).
direct current
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on operating conditions, the
condition of the power tool or the accessories used.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value (vector sum of three directions)
determined in accordance with EN 62841 or
EN 50636-2-94:
a
= vibration emission value
h
K = uncertainty (vibration)
h
Typical A-effective perceived sound levels:
L = sound-pressure level
14
pa
L = Acoustic power level
WA
K , K = Uncertainty
pA WA
L = Guaranteed acoustic power level as per
WA(G)
2000/14/EC
Wear ear protectors!