IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USING
•
Please read through the information and safety advice contained in
these operating instructions carefully and thoroughly before you use
the blender for the first time.
•
This blender is intended only for domestic use.
•
Never allow children to operate electrical devices without supervision
•
Make sure that the voltage shown on the rating plate corresponds with
that of the mains supply. The rating plate can be found on the bottom
of the motor block. The blender is only to be connected to an AC
supply (~). The motor must always be switched off before the blender
is connected with the mains supply. (Switch (8) in the '0' setting).
•
Cutting blades are very sharp. Handle the blender with extreme care
and caution.
•
This blender will only operate if the blending unit is inserted into the
motor block.
•
Before switching on the blender, make sure that the blending unit has
been assembled correctly and has been inserted into the motor block
with the lid attached.
•
The blender is not to be operated with an empty blending unit (i.e.
without solid or liquid foodstuff).
•
Cool down the hot liquids to lukewarm temperature before you pour
them into the blending unit.
•
This electrical device complies with the relevant safety regulations.
Repairs are only to be carried out by an authorized electrician.
Improper repair works can lead to accidents and injury to the user.
•
Do not operate the appliance in dry motion.
•
If the supply cord is damaged, its must be replaced by the
manufacturer or its service agent or a similarly qualified person in
order to avoid any hazard.