Tabla de contenido
Publicidad
TEST
ALWAYS HAVE THE THROTTLE AT IDLE WHEN STARTING ENGINE
-
Check engine oil level.
-
Fill gasoline tank.
-
Set engine ON/OFF switch and operating handle safety switch on "ON" position .
-
Start the engine (see engine operating manual) and if necessary adjust throttle cable for proper
operation.
OPERATING INSTRUCTIONS
KEEP CLEAR OF ROTATING PARTS WHEN OPERATING.
ALWAYS HAVE THROTTLE POSITION AT IDLE WHEN STARTING ENGINE.
NEVER LIFT BY THE GUARD RING.
REMOVE SMOOTHING DISC BEFORE LIFTING.
ALWAYS TEST SAFETY SWITCH FOR PROPER OPERATION BEFORE BEGINNING.
NEVER REFUEL WHILE RUNNING OR WHILE ENGINE IS HOT.
REFUEL IN WELL VENTILATED AREA, AWAY FROM SPARKS AND OPEN FLAME.
ALWAY DISCONNECT SPARK PLUG BEFORE SERVICING.
BEFORE STARTING
ALWAYS HAVE THE THROTTLE AT IDLE WHEN STARTING ENGINE
-
Check engine oil level.
-
Fill gasoline tank.
-
Make sure that all blades are at the same angle. If necessary adjust the blade angle.
STARTING
-
Turn the fuel valve "ON".
-
Set engine ON/OFF switch and operating handle safety switch on "ON" position .
-
Close choke located on the engine only if the engine is cold.
File: BG36 ENG INSTRUCTMANUAL.doc
INSTRUCTIONS MANUAL – BG36
Screw in place the
belt cover .
Test the machine.
WARNING
Page 9 / 19
Publicidad
Tabla de contenido
