Replacing The Filters - Simplicity S5 El Manual Del Propietario

NOTE: Always turn off the vacuum
before performing any service.

Replacing the Filters

1. Remove the dust cup from the
vacuum (Fig. 1).
2. Pull the metal ring to remove the filter
cartridge from the dust cup (Fig. 2).
3. Turn the metal ring on the filter set
counter-clockwise to remove it from
the cartridge (Fig. 3). The filter set
includes a High-Flow Pleated filter and
a foam filter (Fig. 4).
4. Replace with a new filter set turning it
clockwise until it snaps into the filter
cartridge (Fig. 5).
5. Align the filter cartridge to the dust
cup and slide into place (Fig. 2).
6. Align the arrows on the dust cup and
the vacuum (Fig. 6) and slide until it
clicks into place.
NOTE: Filters cannot be washed and
reused.
MAINTENANCE AND CARE
Fig. 3
Fig. 1
Fig. 2
Fig. 4
Fig. 5
Fig. 6
9