Intellinet Network Solutions 560917 Instrucciones página 2

Instructions
This guide presents the basic steps to set up and operate this device.
For the user manual and specifications, visit intellinetnetwork.com. Register your product at
register.intellinet-network.com/r/560917 or scan the QR code on the cover.
Placement
Prior to use, it is recommended that the switch be placed/positioned:
• on a level surface that can support the weight of the switch (and
any other items that need to be considered);
• with a minimum of 25 mm (approx. 1") of clearance on the top and sides for adequate ventilation;
• away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
• where it cannot be affected by excessive moisture.
The switch includes brackets and screws for optional rack mounting.
1 Disconnect any cables from the switch.
2 Position a bracket over the mounting holes on one side
of the switch and secure it in place with screws.
3 Repeat Step 2 on the other side of the switch.
4 Position the switch in the rack and screw the brackets to the rack.
5 Reconnect any cables.
Chassis Ground Column
Located on the side of the power supply connector, a grounding terminal connector is used to
provide proper grounding for your Intellinet Network Solutions switch. If you use the chassis
grounding screw, it should be wired to an object that provides earth ground. In rackmount
installations, grounding is typically provided by the metal frame of the mounting rack.
Connections
• All ports on the switch support Auto-MDI/MDI-X functionality, so you can use straight or
crossover UTP/STP cables to connect the RJ45 ports to PCs, routers, hubs, other switches, etc.
• Use the included power cable to connect the receptacle on the back of the
switch to a power outlet, and confirm that the Power LED lights.
Link / ACT / Speed
Link / ACT / Speed
(SFP1 & SFP2)
2
English
LED Color
Power
Red
10/100M: Orange;
(1 – 24) 1000M: Green
Green
24-Port Web-Managed Gigabit Ethernet Switch with 2 SFP Ports
Status
On Unit is receiving power.
Off Check connection.
On Valid port connection.
Blinking Data transmitted/received.
Off No link established.
On Valid port connection.
Blinking Data transmitted/received.
Off No link established.
Operation