Mounting Diagram; Floor Mounting - Iluminarc ILUMIPOD SL Guía De Referencia Rápida

EN
Mounting
Before mounting this product, read the

Mounting Diagram

Overhead Mounting
Beam-shaping Filters
The Ilumipod SL can be used with the medium, wide, very wide, or asymmetrical beam-shaping filters (sold separately by
Iluminarc). Follow the instructions below to install the optional filters:
Filter retainer ring
Screws
1. Detach the filter retainer ring by removing the screws attaching it to the fixture.
2. Place the beam-shaping filter on top of the lenses.
3. Place back the filter retainer ring on top of the beam-shaping filter.
4. Screw the filter and the retainer ring back in place.
3
QUICK REFERENCE GUIDE
Safety Notes. Use at least one mounting point per product.
Beam-shaping filter

Floor Mounting

Ilumipod SL QRG Rev. 3