Davey Lifeguard Communication Lead To Ecosalt2 - Davey DPLGEU Manual De Instrucciones

Your 220-240V electrical wiring should now look like this (refer Figure 4.22).
PUMP FILTER
PUMPE FILTER
PUMPA FILTRO
POMP FILTER
BOMBA FILTRO
BOMBA FILTRO
POMPE FILTRE
Figure 4.22

4.6.2. Davey Lifeguard communication lead to EcoSalt2

For the Davey Lifeguard controller to communicate to the EcoSalt2, an RJ45 connection cable must be
used. Plug the RJ45 connection cable into the back of the Davey Lifeguard controller (refer Figure 4.22).
Plug the other end of the RJ45 connection cable into the back of EcoSalt2 (refer Figure 4.23).
Figure 4.22
ATTENTION: Power connections and wiring must only be carried out by suitably
electrically qualified personnel. Both the Davey Lifeguard and EcoSalt2 must remain
powered and communication lead firmly connected until the EcoSalt2 has been
programmed. The EcoSalt2 will look like (refer Figure 4.24).
Figure 4.24
ü
PUMP
PUMPE
PUMPA
POMP
BOMBA
BOMBA
POMPE
LIFEGUARD
15
FILTER
FILTER
FILTRO
FILTER
FILTRO
FILTRO
FILTRE
Figure 4.23
▲ CONTENTS
û