Qty. 2; Plastic Spacer Part #603.20 Qty - Bestop Sunrider Instrucciones Para La Instalación

Section 3 Attach Sunrider Assembly To Vehicle
Step 1
Step 1
Turn the Sunrider assembly over then
place it on the vehicle.
Place a Spacer (Part #603.20) between
the Halo Assembly and the vehicle at the
rear mounting position.
Note:
Use the fasteners that were
removed in section 1
P6 - 52460 Rev F 0421
Hardware
Plastic Spacer
Part #603.20

Qty. 2

Installation Instructions - Sunrider for Hardtop
Page 6
Tools
T50
Torx Driver
© 2021 Bestop, Inc.