Tool it PBT 60 Manual De Instrucciones página 11

PBT 600 – Battery Conductance Testeur
13. Additional Function
(Different model has different function. )
Press MENU key to enter Additional Function. Following option and operation can
be done.
13.1 View Results
View results from the last test by pressing OK key.
13.2 Set Voltmeter
MICRO-768 battery tester can also be used as DC voltmeter.
The working range is 1.0-30V DC.
CAUTION: Gys battery tester may be damaged when connected to voltage above
30V!
This function can set the voltmeter On/Off at the bottom line of
the startup interface.
After successful setup, it shows "OK" for 2 seconds, then
return to the previous interface.
13.3Thermometer
Tester integrates internally a temp sensor, which detects the
ambient environment temperature.
Press OK key to display the thermometer interface.
13.4 Thermometer Unit Choice
This option is to set Fahrenheit temperature or Celsius
temperature.
choose ℃ or ℉.After successful setup, it shows "OK" for 2 seconds, then return to the
Firstly, press OK key one time, then use UP/DOWN arrow to
previous interface.
UK - 11