Product Function - Tool it PBT 60 Manual De Instrucciones

PBT 600 – Battery Conductance Testeur

Product Function

Battery test is mainly targeted to analyze the battery healthy status to calculate the actual cold
cranking capability of the battery and the aging extent, which provide reliable analysis evidence for
the test and maintenance of the battery.It notifies the user to replace battery in advance when the
battery is getting aged.
Cranking test is mainly to test and analyze the starting motor. Through testing the actual
required cranking current and cranking voltage of the starting motor, it can find out whether the
starting motor works fine.There are several reasons why the starting motor is abnormal: lubricating
system fault causing the starting loaded torque increasing or rotor friction of the starting motor
causing the increasing friction of the starting motor itself.
Charging test is to check and analyze the charging system, including generator, rectifier,
rectifier diode, etc., thus to find out whether the output voltage of the generator is normal, the
rectifier diode works fine and the charging current is normal.Suppose one of the above mentioned
parts is not in normal situation, it will lead to over charge or incomplete charge of the battery, thus
the battery will be quickly damaged and also greatly shorten the using life of other loaded electrical
appliance.
Specification
1.Voltage Measure Range: 6-30 DVC
2.Test battery Type:All lead-acid starter battery(Lead-acid, EFB,AGM,GEL...)
3.Technology: Conductance Technique
4.Temperature condition: -18℃ ~ +70℃
5.Cover Material : Acid-resistant ABS plastic
6.Tolerance: CCA＜±10；Voltage±0.5%
7.Cable length: 1.2m
8.Certificate: CE& ROHS
9.Three Language Version:

Mainland Version: Chinese Simple, Chinese Traditional,English,Russian,Japanese.

Europe and America Version:English,French,Spanish,Italian,German.

Korean Version: Korean,English.
UK - 4