Thank you for buying this TEFAL appliance, which is intended for domestic use only. Read the
instructions in this leaflet carefully and keep them safe.
For your safety, this product conforms to all applicable standards and regulations (Low Voltage Directive,
Electromagnetic Compatibility, Food Compliant Materials, Environment, ...).
TEFAL has an ongoing policy of research and development and may modify these products without prior
notice.
Prevention of accidents at home
If you do use your appliance
in the company of children:
• always use it under adult
supervision;
• never touch the hot
surfaces of the appliance;
• never leave the appliance
unattended when plugged
in or in use.
Before using for the first time
Never submerge the
appliance's electric base and
cord in water.
Connection
(A)
CAUTION: make sure that
the extraction head is fully
inserted along this axis. Poor
assembly can led to hazards,
abnormal operation or
strong vibration.
Never use your appliance
without the bowl.
Never use on a flexible
surface such as a rubber or
paper tablecloth.
Never place the appliance
directly on a fragile support
(glass table, tablecloth,
varnished furniture, etc.).
Never leave the appliance
plugged in when not in use.
Never run the appliance
when empty.
• For a child, even a slight burn may sometimes be serious.
• As they grow up, teach your children to be careful around hot
appliances in the kitchen.
• If an accident occurs, rinse the burn immediately with cold water
and call a doctor if necessary.
• Remove any packaging, stickers or accessories inside and outside
the appliance.
• Before using for the first time, wash the measuring spoon, the
plastic sticks, the metal base, the bowl and the extraction head
with hot water and dry them carefully. The extraction head must
be completely dry for the appliance to operate properly.
• Place the base of the appliance on a flat, stable, heat resistant
surface. Press down on the appliance hard enough for the suction
cups to adhere (B).
• Insert the bowl onto the base and lock it into the notches designed
for this purpose (C).
• Fit the extraction head onto the axis of the base: align the notches
on the extraction head with the slots in the well of the extractor
head. Firmly push the extraction head downward until it clicks into
place (D) (E).
• To keep the appliance from overheating, do not place it in a corner
or against a wall.
• Completely unroll the cord.
• Check that your electric supply is compatible with the power
and the voltage indicated under the appliance.
• Connect the appliance to a wall socket with an earth
connection.
• If an extension cord is used:
- it must be with an incorporated earth connection;
- take every precaution to ensure that people cannot
become caught up in it.
• The supply cord should be regularly examined for signs of
damage and the appliance is not to be used if the cord is
damaged.
• If the power supply cord is damaged, it must be replaced by
the manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
F
NL
D
I
S
FIN
DK
N
GB
TR
E
P
RUS
UA
PL
27