Part List - Urrea 2488 Manual De Usuario Y Garantía

E N G L I S H
MAINTENANCE
• Both the maintenance and repair of this
jack may only be carried out by qualified
and authorized personnel.
• Clean and lubricate the moving parts of
the jack at regular intervals. The whole
jack should be kept clean and protected
from aggressive conditions at all times.
• If the oil level needs to be checked or
refilled, proceed as follows: With the jack
in the vertical position and the piston
fully retracted, remove the filler plug
and drain its contents into a container.
Position the jack in a horizontal position;
proceed to introduce the necessary
volume as indicated in the table. Then
reinsert the filler plug. IMPORTANT: An
excess of oil over the volume required
may affect the operation of the jack.
• Only use hydraulic oil, HL or HM type.
IMPORTANT: Never use brake fluid.
• Following a
intensive use, it is recommendable to
change the oil in order to extend the
useful life of the jack.
• When the jack is not in use, the piston
should be fully retracted to avoid
corrosion. It is recommendable to apply
an anti-corrosion product to the main
piston and to the pump. Store the device
in a dry and clean place.
6
period of prolonged

PART LIST

# Description
1 Power unit
2 O Ring Ø7.7x1.9
3 Air vent valve
4 Nut
5 Spring washer Ø12
6 Washer Ø12
7 Castor wheel
8 Wheel stand
9 Washer Ø16
10 Spring washer Ø16
11 Inside hex bolt M16x75
12 Nut M12
13 Saddle unit
14 Cramp
15 Iron
16 Outside hex bolt M12x25
17 Butterfly nut M12
18 Round head bolt M12
19 Hook M8
20 Butterfly nut M8
21 Chain
22 Nut M8
23 Outside hex bolt M8x25
24 Washer Ø8
25 Handle
Quantity
1
1
1
4
4
12
4
2
4
4
4
4
1
2
4
6
4
2
2
2
2
6
6
6
2