Preparation
16
Installation instructions
The TWHE may only be transported vertically.
Please
(Otherwise the rotor cannot operate correctly.)
note
The TWHE must be permanently secured against toppling over.
Please
note
Take into account wind conditions as well as the load bearing capacity of the sup-
porting surface.
The TWHE must remain secured until it is fully connected to the air handling
unit and there is no possibility of it toppling over.
The transport locks (highlighted in the diagram) must be removed before
assembling the rotor segments.
If transport locks are also used for the rotor segments of the TWHE, these must also
be removed.
3065279_201804