Wolf KG Top 530 Instrucciones De Montaje página 18

Fitting segments No. 5-8
No. 1
No. 2
Preparation for fit-
ting segment No. 5
No. 4
12
No. 4
18
Installation instructions
No. 4
No. 3
The further rotor segments are fitted one after the other in the same way,
Please
in line with the numerical labelling 5, 6, 7, 8.
note
10 11
The rotor must be prevent from turning unintentionally!
- To allow the further rotor segments to be fitted, it must be
possible to turn the assembled rotor segments onward in
a controlled manner.
- The safeguard must be sized in accordance with the
weight of the rotor.
- Use straps or other suitable means as a safeguard to
prevent turning while fitting the rotor segments.
- Secure the rotor so that the top of segment No. 4 is hori-
zontally level when segment No. 5 is fitted on to it.
- Remove threaded bar M12 (item 9) and nut 3d M12 "long"
with washers (item 8) from segment
8
No. 4.
9
8
- Remove 2 bolts M8x25 (item 10).
- Remove 2 fitting bolts M8x30 (item 11) with nut M8 and
washers (item 12).
DO NOT REMOVE the centre bolt M8x25 (item 10a).
-
Please
note
10a
DO NOT REMOVE
No. 3
No. 2
3065279_201804