Pramac Pmi3000 Manual Del Operador página 7

2.2 Control Panel, Figure 2.
SMART Fuel-economy Switch
When the generator is disconnected with the electrical equipment, generator is idling; when it
is connected with the electrical equipment, the engine will restore to the appropriate
speed.The default state of the switch is at ON position, the fuel consumption is automatically
adjusted according to the load size, to serve the purpose of saving fuel.
OFF: Represents that the SMART switch is turn off, and the engine is at its higher speed.
 The SMART system can not run effectively when large instantaneous current is
required by the electrical equipment.
 Please turn off the SMART switch to reduce the voltage change when the generator
and high electrical load are connected at the same time.
 Please turn off the SMART switch when it is operated in DC status.
European Style Panel(220-240V 50HZ):
American Style Panel(100-120V 60HZ):
Figure 2. Control Panels
4