Pre-Operation Checking - Pramac Pmi3000 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54

3.Pre-operation Checking

Be sure that the generator is in the horizontal plane at ground level, and the engine is shut
down.
3.1Check the engine oil level
 Use engine oil without detergent or 2-stroke engine oil may shorten engine life.
 Please use strong-cleaning power, high-quality 4-stroke engine oil.
 Choose engine oil with right viscosity, which is suitable for the average temperature
in your region.
Please see SAE viscosity level in following picture:
Remove the dipstick on right rear , wipe the dipstick with a clean rag, insert the oil dipstick into
the filler opening, tighten and spin out to check the oil level. If the oil level is lower than the
bottom of the dipstick, fill recommended oil to the filler opening.
Oil capacity:520ml.
See Figure 3.
Conventional filled-up engine oil level (About 520 ml)
Figure 3. Oil Level Diagram
5

Publicidad

Tabla de contenido
loading

Tabla de contenido