Care And Maintenance; Care And Maintenance Of Mechanical Parts; Wind Sensor Maintenance - Stobag ALFRESCO P4000 Instrucciones De Servicio

Operating instructions
• Sun protection systems with electric drives cannot be retracted in a power failure,
caused by a storm, for example. If you leave the house for a longer period for holidays
or the weekend, we recommend setting the automatic control system to manual
operation.
• In automatic operation, the area of extension and retraction must be free of obstacles.
• The sun protection system must be operated in accordance with these instructions.
Other uses are improper. STOBAG cannot accept liability for damage caused by impro-
per use.

3.0 Care and maintenance

When cleaning or servicing sun protection systems with electric drives, ensure that the
power is switched off to prevent accidental extension or retraction.
3.1

Care and maintenance of mechanical parts

As a rule, all mechanical parts are low-maintenance. Occasional lubrication of movable
parts (plastic conductors etc.) with a suitable lubricant (silicon spray) as well as periodical
checks / maintenance by an approved STOBAG specialist are highly recommended and
increase the life of the terrace shading system.
Extend the awning cover fully for cleaning. Clean the frame with a household cleaner for
sensitive surfaces.
3.2

Wind sensor maintenance

All rights to make modifications are reserved
If there is a control system, the mechanical wind sensor
should be checked periodically for damage from external
causes and that it is functioning. Check that it turns in the
wind. If it does not turn correctly, it must be checked by a
STOBAG specialist supplier.
EN-39