Technical Data - ratiotec Soldi Smart Manual Del Usuario

Operation
Switch ON and OFF
To switch on, press ON/OFF as long as an acoustic signal arises . The device starts a self-test
automatically . Banknote can be inserted when the green indicator is constant .
Insert banknote
Place banknote on feeder: the device starts up automatically and pulls in banknote .
False or suspect note
An acoustic signal arises and the red warning symbol blinks in case of a false or suspect note .
Suspect notes are automatically ejected to the rear .
Identify installed software
After being switched off, press ON/OFF until the red warning symbol appears . The red light is
constant and the green indicator will blink once, twice, three times or more depending on the
software version, which corresponds to the number of green signals . The Soldi Smart will switch
off automatically . Also note that the update cable should not be connected!
Software update
Switch off device and connect it to your PC . Press ON/OFF until the red indicator is on .
For further information as well as to download specific files, please visit www .ratio-tec .com .

Technical Data

Currency
Speed
Counterfeit detection
Update function
PC interface
Voltage
Options
Measurements (l x w x h in mm)
Weight in kg
Contact us or contact your Sales Representative for prices and availability!
Euro
0,3 sec . / banknote
IR, MG features, metal thread
/ USB
12 V DC
Rechargeable battery, adapter cable for cigarette lighter
145 x 130 x 75
0,5
4 5