Stocker Magma E-35 TP Manual De Instrucciones página 72

Pruning shears Magma E-35 TP - Pruning shears Magma E-35 TP with telescopic handle
6
Pruning shears Magma E-35 TP
Please check that the pruning shears and batteries are clean and dry.
Place the battery onto the shears'body by sliding it downwards until it clicks-in. To disconnect
the battery, push the two lateral buttons and pull upwards.
Pruning shears Magma E-35 TP with telescopic handle
6
Assembling the shears and the handle
Disconnect the battery by pushing the two lateral buttons and
pulling upwards. Open the two locking-clips on the cover at the
top of the handle and connect the back of the shears to the
dedicated connector. Place the shears inside the cover and close
the locking clips.
6
Assembling the battery and the handle
Insert the battery into the dedicated slot at the bottom of the
handle by sliding it downwards until it clicks-in. To disconnect the
battery, push the two lateral buttons and pull upwards.
142
Art. 312 / Art. 582 / Art. 583
Assembly
Art. 312 / Art. 582 / Art. 583
Pruning shears Magma E-35 TP - Pruning shears Magma E-35 TP with telescopic handle
Removing the hand-protection
For an advanced safety, the control handle is equipped with a
protection for the hand of the operator, which can be removed.
To remove it unscrew the screw and pull it out from its slot.
Usage
Operation modes
Progressive cutting: The blades close progressively according to the movement of the trigger
controlled by the operator, thereby allowing a complete control over the cutting performance. By
releasing the trigger, the blades reopen completely.
Automatic cutting: The blades close completely whenever the trigger is pulled by the operator.
By releasing the trigger, the blades reopen completely.
For both operation modes described above, it is possible to completely customize the blade's
aperture.
Blade's aperture regulation: it is possible to adjust the aperture of the blades completely, by
stopping it at every point, according to the cutting needs of the operator.
Security blade's lock: it allows locking the blades in order to avoid that they open when the
trigger is pulled accidentally.
For further information about the product, please contact info@stockergarden.com
6
7
143