Pruning shears Magma E-35 TP - Pruning shears Magma E-35 TP with telescopic handle
7
Operating the pruning shears Magma E-35 TP with telescopic handle
- The on-off switch can only be found on the shears.
- The shears'cover features a hook that facilitates removing
the cut branches.
- The handle features an aluminium battery protection with
rubber feet to avoid damage.
Extending the telescopic handle
The telescopic handle features a sturdy and stable locking system.
To extend/shorten the handle:
1. Pull the orange locking clip;
2. Push the orange button;
3. Push/pull until the chosen locking hole;
4. Close the locking clip.
146
Art. 312 / Art. 582 / Art. 583
Usage
Art. 312 / Art. 582 / Art. 583
Pruning shears Magma E-35 TP - Pruning shears Magma E-35 TP with telescopic handle
Usage
General instructions
Normally, the cuttings are even and smooth causing no damage to the plants. If an abnormality
occurs, simply release the trigger and the blade will open in the maximum position to avoid
personal injury or property damage. Do not use the device on rainy days. Before using, please
check if the blade is sharp. If the blade is blunt, be sure to sharpen the blade to obtain optimal
performance and avoid damages to the shears. Always close the blades before switching the
shears off, in order to avoid any damages to things or people.
Charging the battery
Do not expose the battery to extreme conditions such as high temperatures or shocks.
Otherwise, personal injury will result from leakage of the electrolytic solution.
Before using or recharging the batteries, make sure that the battery and the battery
charger are both dry.
For further information about the product, please contact info@stockergarden.com
7
147