Safety Rules For Impact Wrenches; Symbols; Important - NORAUTO 46866 Manual De Instrucciones

SAFETY RULES FOR IMPACT WRENCHES

Always wear safety goggles or eye protection when using this tool. Use a dust mask or
respirator for applications which generate dust.
Do not grasp the tool or place your hands too close to the spinning chuck or drill bit.
Your hand may be lacerated or may cause injury.
Secure the material being worked on. Never hold it in your hand or across your legs.
Unstable support can cause loss of control and injury.
Position yourself to avoid being caught between the tool or side handle and walls or
posts. Should the socket or bit become bound in the work, the reaction torque of the tool
could crush your hand or leg.
Check to see that keys and adjusting wrenches are removed from the Impact Wrench
before switching the tool "ON". Keys or wrenches can fly away at high velocity striking
you or a bystander.
When using the Impact Wrench, always maintain a firm grip on the tool with both
hands.
Keep the handle of the Impact Wrench dry, clean, and free from oil and grease.
Do not run the Impact Wrench while carrying it at your side. A spinning socket or bit
could become entangled with clothing and injury may result.
Do not use the Impact Wrench if it has been damaged, left outdoors in the rain, snow,
wet or damp environments, or immersed in liquid.
Maintain labels and nameplates on the Impact Wrench. These carry important
information.
Use with 12 volt systems only.
NOTE Performance of this tool may vary depending on variations in battery
power.
IMPORTANT: Some of the following symbols may be used on your tool. Please study them and
learn their meaning. Proper interpretation of these symbols will allow you to operate the tool
better and safer.
SYMBOL
V
A
Kg

SYMBOLS

NAME
Volts
Amperes
Kilograms
WARNING
EXPLANATION
Voltage (Potential)
Current
Weight
95