Location Of Controls - Roadstar CLR-2750 Manual De Instrucciones

WARNINGS
The exclamation point within the triangle is a warning sign
alerting the user of important instructions accompanying the
product.
The lightening flash with arrowhead symbol within the triangle is
a warning sign alerting the user of "dangerous voltage" inside
the unit.
To reduce the risk of electric shock, do not remove the cover.
CAUTION
No user serviceable parts inside the unit. Refer all servicing to
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
qualified personnel.
This unit operates on 230V ~ 50Hz. If the unit is not used for a
230v~
long period of time, remove the plug from the AC mains.
This unit must not be exposed to moisture or rain.
The power switch in this unit is mounted on the secondary
circuit and does not disconnect the whole unit from the mains
in OFF position.
Ensure all connections are properly made before operating the
unit.
This unit should be positioned so that it is properly ventilated.
Avoid placing it, for example, close to curtains, on the carpet
or in a built-in installation such as a bookcase.
Do not expose this unit to direct sunlight or heat radiating
sources.
Make sure the battery is inserted according to the proper
- +
polarity.
If the unit is not used for a long period of time (more than 1
month), remove the battery from the compartment to avoid
- +
possible leaking.
English 1 2
CLR-2750
DIGITAL ALARM CLOCK WITH FM RADIO
TABLE OF CONTENTS
•
•
•
•

LOCATION OF CONTROLS

1. CLOCK SET BUTTON
2. SLEEP BUTTON
3. SNOOZE BUTTON
4. ALARM SET BUTTON
5. HOUR SET BUTTON
6. MINUTE SET BUTTON
7. ALARM / SLEEP OFF
8. VOLUME CONTROL
9. FUNCTION SWITCH
10. LCD DISPLAY
11. AC 230V CABLE + FM ANTENNA
12. TUNING CONTROL
13. DIMMER SWITCH (HI-LOW)
English
LOCATION OF CONTROLS
POWER SUPPLY
AC POWER
SPECIFICATIONS