Hose Connections - Steinbach Active Balls 50 Manual Original

5. Connect the base plate
vessel .
6
The base plate is connected to the filter
vessel.

Hose connections

- Fasten all attached hose connections with hose clamps to ensure that the system
does not leak.
We recommend additionally sealing the hose connections with Teflon tape.
- Use suitable pool hoses for the described connections.
Some hoses, such as the pressure hose, are very stiff. Place them in the sun
before use so that the heat makes them more flexible.
Connecting the pressure line
1. Push or screw one end of the pressure
hose onto the pump outlet
14
2. Place a hose clamp
pressure hose. Using a Phillips
screwdriver PH1
the hose clamp clockwise to tighten
the hose clamp over the connection.
3. Place the second hose clamp over the
pressure hose.
4. Push the end of the pressure hose
onto the pressure line
on the filter cover
5. Position the hose clamp on the
connection and tighten this one as
well with a Phillips screwdriver.
The pressure line
26
48
to the filter
9
.
22
over the
15
, turn the screw on
32
connection
26
.
1
is connected.
10
9
Active Balls 75
11
12
26
6
Active Balls 50
14
15
22
1