Using The Configuration Utility - D-Link DWL-AG520 Guia De Inicio Rapido

Appendix (Continued)

Using the Configuration Utility

A. Status:
MAC Address of the
Access Point that is
associated with the
DWL-AG520.
D. Wireless Mode:
peer-to-peer networking.
E. Encryption: Displays the current encryption status of the wireless connection.
F. TxRate:
The default
setting is Auto; meaning,
TxRate settings are
automatically determined
by the DWL-AG520
depending on the
distance from the access
point.
B.
Displays the
Identifier is the name
assigned to the wireless
network. The factory SSID
setting is set to default.
The factory setting is set to Infrastructure. Ad-Hoc mode is used for
A
B
C
D
E
F
G
H
I
G. Channel:
information. By default, the channel is
set to 6. Please note that the DWL-
AG520 will automatically adjust channel
depending on the Access Point.
H. Signal Strength:
DWL-AG520 wireless connection to the access point.
The Signal Strength represents the wireless signal
between the access point and the DWL-AG520. The
percentage coincides with the graphical bar.
:
SSID The Service Set
Displays the channel
Displays the Link Quality for the
9
:
C. Frequency
Displays the
current fre-
quency used
by the adapter.
I. Packet
Count:
Graphi-
cally displays
the statistics of
data transmitted
and received.