Conceptronic CFULLHDMAi Manual Del Usuario página 73

ENGLISH
11. Network sharing - configuration and usage
The Conceptronic CFULLHDMAi can be accessed as network share. With the network sharing feature, you
can share the USB connected storage device through your network, so other computers can reach the data
stored on the USB storage device.
Before you can use the network sharing feature, you need to connect a USB storage device to the USB port
of the CFULLHDMAi. The USB storage device can be formatted with the FAT32, NTFS or EXT2 file system.
Note: If another file system than FAT32, NTFS or EXT2 is used, the network sharing feature will not be
available.
Note: If you connect the harddisk to the CFULLHDMAi while the CFULLHDMAi is already turned on, the
network sharing feature will not be available. You need to turn on the CFULLHDMAi while the
harddisk is already connected in order to use the network sharing feature.
Note: If the CFULLHDMAi is not connected to a network, the network sharing feature will not be
available.
11.1 Network sharing - configuration
Select the option 'Setup' in the main menu. The Setup menu will be shown on your screen. In the Setup
menu, select 'System Setup'.
In the System Setup menu, there will be a new option available: 'Share hard disk'.
Select the option 'Share hard disk'. The 'Share hard disk' setup menu will be shown on your screen.
You can now change the following settings:
- Share name
- Group name
- User name
- Password
When the settings are changed, press the 'Back' (8) button on the remote control to return to the main
Setup menu.
Change the network name of the CFULLHDMAi.
Change the workgroup where your CFULLHDMAi is connected to.
Set a username to access the network share.
Set a password to access the network share.
73