INSTRUCTIONS FOR USE
The Storage Cart can be loaded as shown (Figure 22). Lower the Tower into its place
in the Cart by placing the hook end of the Tower in the slot between the cart body
and the pin. To store the Table Clamp, slide it over the end of the Cart latch and
lower the latch into place. The Cart will hold up to six Weights, the Weight Hanger,
the Tower and the Clamp. The Cart allows for simple movement and storage of the
system. The Cart should be stored in a location with an even surface.
Caution: Do not leave Cart on a inclined surface
Warning: Applying force to the Tower when it is loaded in the Cart can result in
tipping the cart.
Document Number: D-720764
Version: C
AR-1650-05 (X6)
Page 30
AR-1650-01
AR-1650-07
AR-1650-04
Figure 22
Ref Blank Template: 80025118 Ver. E
Issue Date: 27 MAR 2020