On/Off Switch - sunjoe 24V-GT10-LTE Manual Del Operador

ON/OFF Switch

1. Insert the battery into the battery compartment on the
back of the machine. Press until it clicks into position.
Press and hold the safety lock button, then squeeze the
ON/OFF switch. When the machine runs steadily, release
the safety lock button (Fig. 9).
Fig. 9
Safety lock button
On/Off switch
2. To switch OFF, release the ON/OFF switch (Fig. 9).
Remove the battery.
Adjusting the Auxiliary Handle
1. Switch off the machine and remove the battery. Wait until
the blade comes to a complete stop.
2. Rotate the auxiliary handle knob counterclockwise to
loosen the auxiliary handle (Fig. 10).
Fig. 10
Auxiliary
handle knob
3. Adjust the position of the auxiliary handle as needed by
sliding it along the upper pole (Fig. 11).
4. Adjust the angle of the auxiliary handle as needed by
pivoting it as shown (Fig. 11).
Fig. 11
5. Lock the auxiliary handle by rotating the knob clockwise.
Trimming
Fig. 12
m
WARNING!
the body, keeping at least two feet of clearance between
Auxiliary handle
any body part and the bladed trimmer accessory head. Any
contact with the trimmer blade while operating can result in
serious personal injury (Fig. 12).
m
WARNING!
allow at least 1 foot of clearance between the blade and any
nearby objects. Never use the trimmer near sidewalks, fencing,
posts, siding, buildings, or other immovable objects. Damaged
blade can cause serious personal injury.
• Inspect the blade before each use and periodically during
long periods of use. If the blade is bent, warped, cracked,
chipped, or damaged, discontinue use immediately and
replace the blade.
• Inspect and clear the area of any hidden objects such as
glass, rocks, concrete, fencing, wire, wood, metal, etc.,
which can be thrown by the machine.
11
Auxiliary
Handle
Trimming with tool
Always hold the grass trimmer away from
To avoid damaging the blade or blade hub,