Home Decorators Collection 59252 Guía De Uso Y Mantenimiento página 7

Assembly - Hanging the Fan
1
Attaching the fan to the electrical
box
WARNING: To avoid possible electrical shock,
turn the electricity off at the main fuse box before
wiring. If you feel you do not have enough electrical
wiring knowledge or experience, contact a licensed
electrician.
NOTE: For better fan performance, make sure the
mounting plate is level. Additional washers (FF)
(not included) may be needed to insert between the
outlet box and mounting plate.
□
Turn the power off.
□
Loosen the two mounting screws (GG) supplied with
the outlet box, but do not remove the screws.
□
Securely attach the mounting plate (A) to the outlet
box by sliding the mounting plate (A) over the two
mounting screws (GG) supplied with the outlet box.
Pull the 120-volt supply wires (the black, white and
ground wires) out of the outlet box (EE) and through
the hole in the mounting plate (A) and lay them to the
side.
2
Hanging the fan-motor assembly
□
Attach the trim ring (B) to the fan motor assembly (C)
from the opening of the motor housing. Make sure the
slots of trim ring (B) are on top.
□
Carefully lift the fan-motor assembly (C) and hang the fan
motor assembly (C) on the hook of the mounting plate (A)
by utilizing one of the holes at the outer rim of the motor
housing so that it is securely suspended. Then connect
the wiring to your fan according to step 4 "Making the
Electrical Connections".
7
Please contact 1-800-986-3460 for further assistance.
A
C
B
HOMEDEPOT.COM/HOMEDECORATORS