Singer Expert Finish II Manual De Instrucciones página 9

Burst of Steam
This function is ideal for removing stubborn wrinkles or pressing extra-sharp
creases.
WARNING: NEVER IRON OR STEAM CLOTHES WHILE THEY ARE BEING
WORN. NEVER DIRECT THE STEAM JET AT PEOPLE OR ANIMALS.
• Follow the instructions as described in the "Steam Ironing" section.
• While steam ironing, press the Burst of Steam button every 4 to 5
seconds. Most wrinkles can be removed within three bursts.
NOTE: It may be necessary to press the Burst of Steam button a few times to
start this function. For optimum steam quality, do not operate the Burst of Steam
more than three times in succession.
Vertical Burst of Steam
This feature enables you to remove wrinkles from hanging garments (jackets,
coats, shirts), hanging curtains or other hanging fabric.
WARNING: NEVER IRON OR STEAM CLOTHES WHILE THEY ARE BEING
WORN. NEVER DIRECT THE STEAM JET AT PEOPLE OR ANIMALS.
• Follow the instructions as described in the "Steam Ironing" section.
• Hold the iron upright, 6-12 inches away from the garment.
• Press the Burst of Steam button to direct steam at the area.
• Steam will penetrate into the garment, removing the wrinkles.
• For stubborn wrinkles, wait 4 to 5 seconds before pressing the Burst of
Steam button again. Most wrinkles can be removed within three bursts.
NOTE: Maintain a distance of 6-12 inches from delicate fabric (synthetics, silk,
velvet, etc.), otherwise the fabric could be damaged.
It may be necessary to press the Burst of Steam button a few times to start this
function. For optimum steam quality, do not operate the Burst of Steam more
than three times in succession.
Burst of Steam Button Burst of Steam Vertical Burst of Steam
9