Intended Use; Safety Instructions - BLACK&DECKER LZR4 Manual De Instrucciones

Intended use

This Black & Decker tool has been designed to project laser
lines to aid in DIY applications. This tool is intended for
consumer use only.

Safety instructions

Warning! When using battery-powered tools,
basic safety precautions, including the following,
should always be followed to reduce the risk of
fire, leaking batteries, personal injury and mate-
rial damage.
Read all of this manual carefully before operating the tool.
u
Retain this manual for future reference.
u
Keep work area clean
Cluttered areas and benches can cause accidents.
u
Consider work area environment
Do not expose the tool to rain. Do not use the tool in damp
u
or wet conditions. Keep the work area well lit. Do not use
the tool where there is a risk of causing fire or explosion,
e.g. in the presence of flammable liquids and gases.
Keep children away
Do not allow children, visitors or animals to come near the
u
work area or to touch the tool.
Do not overreach
Keep proper footing and balance at all times.
u
Stay alert
Watch what you are doing. Use common sense.
u
Do not operate the tool when you are tired.
u
Use appropriate tool
The intended use is described in this instruction manual.
u
Warning! The use of any accessory or attachment or
performance of any operation with this tool other than those
recommended in this instruction manual may present a risk of
personal injury.
Check for damaged parts
Before use, carefully check the tool for damage. Ensure
u
that the tool will operate properly and perform its intended
function.
Do not use the tool if any part is damaged or defective.
u
Store idle tools
When not in use, tools and batteries should be stored in a
u
dry, locked up or high place, out of reach of children.
(Original instructions)
Repairs
This tool complies with relevant safety requirements.
u
Repairs should only be carried out by qualified persons
u
using original spare parts; otherwise this may result in
considerable danger to the user.
Additional safety instructions for non-
rechargeable batteries
Never attempt to open for any reason.
u
Do not store in locations where the temperature may
u
exceed 40 °C.
When disposing of batteries, follow the instructions given
u
in the section "Protecting the environment". Do not inciner-
ate the batteries.
Under extreme conditions, battery leakage may occur.
u
When you notice liquid on the batteries, proceed as fol-
lows:
Carefully wipe the liquid off using a cloth. Avoid skin
w
contact.
Additional safety instructions for lasers
Warning! Laser radiation.
Do not look into the laser beam.
Do not view the laser beam directly with optical
instruments.
This product is not to be used by children under
16.
This laser complies with class 2 according to EN 60825-1.
u
Do not replace a laser diode with a different type. If
damaged, have the laser repaired by an authorised repair
agent.
Do not use the laser for any purpose other than projecting
u
laser lines.
ENGLISH
Refer to the laser prod-
uct characteristics.
3