Intended Use; General Safety Instructions - SATA jet 1000 K RP Instrucciones De Servicio

Operating Instructions SATAjet 1000 K (RP / HVLP) / H (RP)
EN
[3-27] Separate pressure gauge
without control device (see
chapter 15)
5.

Intended Use

The spray gun has been designed for the application of paints, lacquers
and other sprayable media by means of compressed air on suitable sub-
strates and surfaces.
6. Safety Instructions

6.1. General Safety Instructions

• Before using the spray gun, please read all safety and the operating
instructions carefully. Safety instructions and indicated safety meas-
ures are mandatory.
• Please keep all enclosed documents and make sure that the spray
gun is handed over only together with these documents.
6.2. Specific Safety Instructions for Spray Guns
• Local safety, accident prevention, work and environment protection
regulations are mandatory!
• Never direct a spray gun at human beings or animals!
• Use, cleaning and maintenance by skilled personnel only!
• People whose ability to react is impaired by drugs, alcohol, medication
or for other reasons are not allowed to use a spray gun!
• Never operate spray gun if it is damaged or if parts are missing! Only
use spray gun of locking screw [1-14] is firmly in place! Tighten lock-
ing screw using original SATA combination tool with max. 1 Nm.
• Before use, the spray gun should always be checked and repaired, if
necessary!
130
Warning! Attention!
Warning! Attention!
[3-28] Pressure measurement in
compressed air circuit