Skil SD12705 Serie Manual Original página 13

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
sensory or mental
limitations or a
lack of experience
or knowledge
if a person
responsible
for their safety
supervises them
or has instructed
them in the safe
operation of the
charger and
they understand
the associated
dangers (otherwise,
there is a danger of
operating errors and
injuries)
• Supervise children
(this will ensure that
children do not play
with the charger)
• Cleaning and user
maintenance of
the battery charger
shall not be made
by children without
supervision
• Do not use charger when damaged
• Permitted ambient temperature (tool/
charger/battery):
- when charging 4...40°C
- during operation –20...+50°C
- during storage –20...+50°C
ACCESSORIES
• SKIL can assure flawless functioning
of the tool only when original
accessories are used
BEFORE USE
• Always check that the supply voltage
is the same as the voltage indicated
on the nameplate of the charger
• Avoid damage that can be caused by
screws, nails and other elements in
your workpiece; remove them before
you start working
• Secure the workpiece (a workpiece
clamped with clamping devices or
in a vice is held more securely than
by hand)
• Use suitable detectors to find
hidden utility lines or call the local
utility company for assistance
(contact with electric lines can lead
to fire or electrical shock; damaging
a gas line can result in an explosion;
penetrating a water pipe will cause
property damage or an electrical
shock)
DURING USE
• In case of electrical or mechanical
malfunction, immediately switch off
the tool or unplug charger from power
source
EXPLANATION OF SYMBOLS ON
TOOL/CHARGER
3 Read the instruction manual before
use
4 Only use the charger indoors
5 Double insulation (no earth wire
required)
6 Incorrect polarity of the charger
connection could cause a hazard (only
charge the battery with the charger
supplied)
7 Do not dispose of electric tools and
batteries together with household
waste material
USE
• Charging battery 8
! the battery supplied is partially
charged (to ensure full capacity
of the battery, completely charge
the battery in the battery charger
before using your power tool for
the first time)
- connect charger cable K with both
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sd12705 aa

Tabla de contenido