Barrette HANDIRAIL EPN-51518 Instrucciones De Instalación página 3

1.
Attach Mid Rail to Posts:
a. Insert the ends of the curved mid rail into the
holes of each post making sure holes in rail
align with holes in post (Fig. 1).
NOTE:
The screw holes on the upper post are
oriented closer to the top of the rail hole,
while the screw holes on the lower post
are oriented closer to the bottom of the rail
hole. Upper and Lower posts are marked
underneath mounting plate.
b. Drive #8 x ¾" self-tapping screws into post
holes
and through rail holes (one on each side). Do
not tighten completely (Fig. 2). Do for both top
and bottom posts.
2.
Attach Top Rail With Curved Ends to Posts:
a. Insert the ends of the top rail on top of each
post making sure holes in rail align with holes in
post (Fig. 3).
b. Drive #8 x ¾" self-tapping screws into post
holes and through rail holes (one on each side).
Do not tighten completely (Fig. 4). Do for both
top and bottom posts.
Post Hole
Post
Screw
Mid Rail
Hole
Post
Top Rail
Screw
Hole
Top Rail
Fig. 1
Fig. 2
Mid Rail Mid Rail
Fig. 3
Post
Fig. 4
Post
3