Avtech AVH800A6 Manual Del Usuario página 8

Manual Connection Setup
To manually assign a channel to connect to the IP camera, select a corresponding "PROTOCOL" from the drop down
list first, click "URI" to enter the address of the camera, and enter its port number. There are four protocol types
available in the drop down list as follows: "AVTECH", "ONVIF", "RTSP OVER HTTP", and "RTSP OVER UDP". If you
are using AVTECH IP cameras, please select "AVTECH", otherwise, choose the protocols your cameras support.
CONNECTION
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
NOTIFY
MULTICASTING
EXIT
ADVANCED CONFIG
CHANNEL
CH1 ONVIF://10.1.1.22:8080
CH2 ONVIF://10.1.1.14:88
CH3 PANASONIC://10.1.1.30:88
CH4 VIVOTEK://10.1.1.12:88
URI CONFIG
SETUP
SETUP
SETUP
SETUP
6