Corrective Action; After Sale Service; Accessories - SATA paint set 10 Instrucciones De Servicio

Operating Instructions SATA FDG
Malfunction
Leak between
tank flange and
tank cover.
Leak in the com-
pressed air fitting.
Leak at the agitator
holder.
Leak at the material
outlet.
Material pressure
cannot be adjusted.

14. After Sale Service

For accessories, spare parts and technical support, contact your SATA
dealer.

15. Accessories

SGE-trolly
The SATA FDG 24 / 48 can be transported easily and conveniently with a
chassis.
Pot insert
Material pressure tanks can be retrofitted with a stainless steel insert pot
that makes it much easier to clean the material pressure tank.
Notice!
Retrofitting the insert pot is not possible. This would make it necessary
to shorten the riser and the drive shaft.
Art. No.
paint set 10
- 46037
47530 31302
upon request upon re-
quest
Cause
Tank flange, cover
seal soiled or porous.
Defective seals.
Defective seals.
Defective seals.
Material pressure
controller
defective.
FDG 24 FDG 48
14332
47639
upon re-
quest

Corrective action

Clean or replace the
seal.
Replace seals.
Replace seals.
Replace seals.
Replace material pres-
sure controller.
Description
SGE-trolly
Pot insert
Pair of hoses
EN
Number
1 pc.
1 pc.
1 set
183