TOYAMA TM6AFS Manual Del Usuario página 34

CAUTION
6. If the water level is below the sacrificial anode (anti-cavitation plate), or if the cooling
water supply is insufficient, the motor may melt.
7. Start the engine. Let it run until all the fuel in the engine runs out.
8. Remove the spark plug (s) (ATTENTION: the engine may be hot, expect to cool before
performing this procedure). Add a small amount of engine oil into the cylinder. Move the
engine start so that the oil spreads inside the engine;
ATTENTION
Engine may be hot after operation. When performing maintenance, be extremely careful not
to touch the hot parts of the engine, such as the head, block and other parts.
Do not touch or remove any electrical parts when starting the engine or during its operation.
Keep hands, hair and clothing away from the steering wheel or any other rotating part while
the engine is running.
9. Change the oil;
10. Add lubricant to each moving part of the equipment;
11. Replace the spark plugs;
12. Replace the upper fairing of the equipment;
13. Apply a layer of automotive wax to the outer surfaces to create strength and durability for
your product;
14. Store the engine in an upright position;
15. Store in a well-ventilated, dry and direct sunlight environment.
ATTENTION:
Equipment equipped with portable fuel tank: store the tank in a dry, well ventilated area
and without direct exposure to the sun.
34