Volvo 31664408 Manual Del Usuario página 19

– Lift the bicycle holder onto the roof.
– Thread the brackets around the front
load carrier and secure the brackets on
the screw heads.
– Repeat the operation for the rear load
carriers.
Note!
Ensure that the bracket does not lie
against the car roof, which can damage
the paint.
Bicycle holder, roof mounted
Installing on square section and aluminium rails
– Tighten the tensioner arms.
– Fold down the tensioner arms.
– If the tension feels slack: tighten the
tensioner arms further.
– If tensioning is very stiff: slacken off the
tensioner arms slightly.
– Turn the key in the lock on the front
tensioner arm.
en-GB
17