Help With Problems; Technical Data; Disposal - NUK JOLIE Manual De Instrucciones

Ocultar thumbs Ver también para JOLIE:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
Problem
Pump has no
suction or too
little suction
Medical product according to directive 93/42/EEC
Temperature range
- Operation
- Storage
If at some stage the appliance is no longer
fit for use, the parts can be disposed of
along with normal household waste.

12. Help with Problems

Reason
The pump rod 6 is not seated
properly in the pump
diaphragm 7
Pump diaphragm 7 missing,
fitted incorrectly or damaged
Lip valve 9 is incorrectly
positioned
Lip valve 9 missing, fitted
incorrectly or damaged
Breast milk container 10 is full
and lip valve 9 is touching the
expressed milk
No vacuum is produced
Pump is being held at an
angle

13. Technical Data

14. Disposal

Make sure that the pump rod 6 is fully
inserted in the hole in the pump
diaphragm 7 (see "7. Reassembling the
Pump (Figures G to N)" on page 18).
Insert pump diaphragm 7 correctly (see
"7. Reassembling the Pump (Figures G
to N)" on page 18). If anything is
damaged, please contact the NUK
Service Center (see "Contact addresses"
on page 91).
Position lip valve 9 correctly
(see "7. Reassembling the Pump (Figures
G to N)" on page 18).
Check that the lip valve 9 is correctly
positioned. If anything is damaged,
please contact the NUK Service Center
(see "Contact addresses" on page 91).
Change the breast milk container 10.
Make sure that the breast shield 2 forms
a complete seal around the breast.
Make sure that the silicone cushion 1 is
inserted correctly and is pulled over the
edges of the breast shield.
Hold the pump as upright as possible.
Class I
+6 °C to +40 °C
0 °C to +40 °C
22
Remedy

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

10.252.090

Tabla de contenido