Publicidad
Idiomas disponibles
Idiomas disponibles
LIFT CORPORATION Sht. 7 of 16 DSG#
ADJUSTING FOOT GUARD SWITCH MECHANISM
NOTE: Foot guard switch mechanism is adjusted at the factory. However, it may
be necessary to adjust if undamaged, and not working correctly.
1. Lower platform to the ground as shown
in FIG. 7-1.
2. Locate adjustment bolts as shown in
FIGS. 7-1 and 7-2.
3. Adjust bracket (FIG. 7-2) to 30° by turning
adjustment bolt (FIG. 7-2). To decrease
angle, turn adjustment bolt CLOCKWISE.
To increase angle, turn the bolt
COUNTER-CLOCKWISE.
BRACKET
ADJUSTMENT
BOLT
© MAXON Lift Corp. 2018
30°
FIG. 7-2
M-16-01
Rev. A Date: 08/23/18
ADJUSTMENT
ADJUSTMENT
BOLT
BOLT
ADJUSTMENT POINTS
FIG. 7-1
Publicidad
