Rfl100 Overview - Vaisala RFL100 Guía Rápida

RFL100 overview

Vaisala RFL100 data logger is a wireless, battery powered data logger. It supports several
types of Vaisala probes for measurement of humidity, temperature, and carbon dioxide (CO
RFL100 is intended as a data collection point in a Vaisala viewLinc Monitoring System.
>100 m (330 ft) range
RFL100
Data Loggers
Figure 10 Connecting RFL100 to the viewLinc Monitoring System
The wireless connection of RFL100 requires a Vaisala AP10 access point. AP10 can connect up
to 32 loggers to the viewLinc Monitoring System, and you can have up to 8 access points in
range of each other. In a typical indoor space, install the AP10 within 100 meters (328 ft) of the
RFL100. In an open space with line-of-sight and no interfering structures, the range can be
over 500 m (1640 ft). The wireless connection operates on 868 MHz, 915 MHz, or 920 MHz
frequency band depending on the model.
RFL100 is optimized for low power operation. It reads the probe once a minute, and transmits
measurement data to the access point every 4 minutes. Because the radio link is not
continuous, remote management actions and system joining status may take some time to be
updated on the display of the data logger.
Before you start installing RFL100 data loggers, install viewLinc Enterprise Server
and one or more AP10 access points within range of RFL100. This way RFL100 can
immediately join your system.
For more information on viewLinc Monitoring System installation, see the
viewLinc Setup Guide and viewLinc User Guide for your viewLinc Enterprise
Server version.
20
VaiNet wireless Wired
network
AP10
Access Point
).
2
NTP Server
viewLinc
Enterprise Server
M211822EN-G